These instruments are used to check filter obstructions, pressure drops, flow rate differences, level, measurements and generally a difference between two pressures of onel or different circuits. The measuring element is formed by two bourdon tubes, acting on the same movement. In this way the pointer shows only the difference between the two pressures corresponding respectively to upstream and downstream pressure of the circuit.
MD13 MD14 MD15
MD16 MD17 MD18
Technical specifications
Type |
MD13 |
MD14 |
Case diameter |
DN 150 |
DN 100-150 |
Parts inside |
AISI316L |
AISI316L |
Range |
0/0,6 – 0/25 bar |
0/10 mbar – 0/2,5 bar |
Accuracy class |
1,6 |
1,6 |
Protection degree |
IP 55...67 |
IP 55...67 |
Static pressure |
100 bar |
25 bar |
Connections |
lower mounting with front/back flange |
lower mounting with front/back flange |
Datasheet | EN | EN RU |
Type |
MD15 |
MD16 |
Case diameter |
DN 100-150 |
DN 100-150 |
Parts inside |
AISI316L |
AISI316L |
Range |
0/100 mbar – 0/25 bar |
0/400 mbar – 0/10 bar |
Accuracy class |
1,6 |
2,5 |
Protection degree |
IP 55...67 |
IP 55...67 |
Static pressure |
200 bar |
100 bar |
Connections |
lower mounting with front/back flange |
lower mounting with front/back flange |
Datasheet | EN RU | EN |
Type |
MD17 |
MD18 |
Case diameter |
DN 150 |
DN 100 |
Parts inside |
AISI316L |
AISI316L |
Range |
0/1 – 0/10 bar |
0/400 mbar – 0/10 bar |
Accuracy class |
1,6 |
1,6 |
Protection degree |
IP 55...67 |
IP 55...67 |
Static pressure |
400 bar |
40 bar |
Connections |
lower mounting with front/back flange |
lower mounting with front/back flange |
Data sheet | EN | EN |
Electric contacts for diaphragm and differential pressure gauges.
ATEX Eex certificate for MD13-15-16-17 pressure gauges.
Manufacturer:
NUOVA FIMA (Italy).