Glow plug tester for 12 volt heater plugs with 3 diodes

  

GKP 04.1 (070606)

Glow plug tester for 12 volt heater plugs with 3 diodes.
The test may be executed with glow plugs mounted. The tester should be connected to the vehicle battery by means of the red (+) and black (-) battery terminals. The auxiliary terminal should be connected to the glow plug undergoing testing. After pressing the START button the test result is shown within 15 seconds. The condition of the glow plug is indicated by diodes.

• correct connection (green)
• good (green)
• defective (red)

Due to the integral automatic circuit breaker a change of the vehicles‘ fuses is not necessary.

shipment

• 1 glow plug tester
• 1 power supply cable with clamps, length 1.40 m (4 ft)
• 1 auxiliary clip with cable, length 1.40 m (4 ft)

Glow plug tester for 4.4 V and 5 V glow plugs

  

GKP 05 (070607_1)

Glow plug tester for 4.4 V and 5 V glow plugs. Testing can take place with the glow plug installed. The state of the glow plugs is displayed by two LEDs (green/red).

• visual displays for ´instrument ON´, ´low battery´, ´glow plug OK´ and ´glow plug faulty´
• robust clip connectors for glow plug and earth
• automatic tester cutout
• power supply by 9 V Monobloc battery

Manufacturer/vehicle type for example:
AUDI: A2, A3, A4, A6, A8
BMW: 1-series, 3-series, 5-series, 7-series, X3, X5
CHRYSLER: 300 C
MERCEDES: A-class, B-class, C-class, CLK, CLS, E-class, GL-class, ML-class
MITSUBISHI: Grandis, Outlander
SEAT: Alhambra, Ibiza, Leon, Toledo 3
SKODA: Octavia, Roomster
VW: Caddy, Crafter, Eos, Golf 5, Golf 6, New Beetle, Passat, Phaeton V6, Tuareg, Touran 

shipment

• 1 glow plug tester
• 2 connecting cables each 1.00 m long (3 ft)