lt en ru
Autotestas header

Test equipment for SCR-systems (AdBlue)

Refractometer (for testing the Urea concentration in AdBlue®* operating additive)

     

RFM 03_%AB (110306_25)

Test instrument recommended by Daimler AG.

Refractometer for testing the Urea concentration to evaluate the quality of the operating additive AdBlue®*.

Prolonged periods in storage will cause a creeping decomposition of AdBlue®* operating additive.

  • on the delivery of new AdBlue® operating additive containers (quality as supplied)
  • during storage on one´s site
  • in customers´ vehicles

*AdBlue® is a registred Trade Mark of VDA, Verband der Deutschen Automobilindustrie e.V.

Sampling and concentration test kit for AdBlue®* operating additive

  

AEKP 01 (061202_1)

Sampling and concentration test kit for AdBlue®* operating additive. With the AEKP 01, specimens of AdBlue®* can be extracted from the tank and evaluated.
Evaluation options:

  • Refractometer for AdBlue®* operating additive concentration (f.descrip. see RFM 03_%AB)
  • Delivery rate of the SCR pump (only with the support of the vehicle´s software)
  • Determination of the injected volume of AdBlue®* operating additive (only with the support of the vehicle´s own Software)

*AdBlue® is a registred Trade Mark of VDA, Verband der Deutschen Automobilindustrie e.V. 

shipment

  • 1 RFM 03 refractometer
  • 10 pipettes
  • 1 extractor for specimens with suction ball
  • 1 measuring cylinder with scale, 500 ml
  • 1 narrow-necked PE bottle, 1000 ml capacity
  • 1 silicone hose, dia. 9 mm, length 5.00 m
  • 1 strong plastic case

Tightness of SCR-system

  

AEKP 06 (061207_1)

The Leitenberger test device AEKP 06 was designed to detect and localize leaks in SCR-systems. With the test device AEKP 06 an empty SCR-system can be tightness tested.

The test pressure is fixed according to the customers requirements – so the operator cannot adjust the test pressure accidently to high in order to avoid any damage of the SCR-System. The test pressure is induced via the regualr filling neck and is pressurizing the whole SCRsystem. Operated with workshop pressure. Results can be obtained in a very short time.

Diagnosis, flushing, cleaning of DENOX-modules (also referred DeNOx)

     

AEKP 08_LR (061209_2)

AEKP 08_LR is offering various diagnosis and flushing/cleaning possibiliies of the DENOX-modules. DENOX-modules are used in conjunction with larger engins for exhaust after treatment. (e.g. in construction-, forestry and agricultural equipment)

Delivery in solid plastic case

shipment

Delivery in solid plastic case

Filler unit to fill SCR systems with AdBlue®* operating additive

  

ABE 02_MB (061201_4)

Filler unit recommended by Daimler AG.

Filler unit to fill SCR systems with AdBlue®* operating additive. To be used, especially, for all Mercedes-Benz cars with an SCR system. Not to be used for commercial vehicles, e.g. Sprinters or transport vehicles. It is possible to use the filler unit directly with the original AdBlue®* operating additive container A 004 989 04 20. This saves transferring the fluid from one container to another and eliminates the possibility of contaminating the AdBlue®* operation additive.
The filler is designed to function without compressed air.

  • easy to use
  • can be used anywhere
  • integrated device to prevent overfilling the SCR system
  • low cost, entry level maintenance of SCR systems

*AdBlue®* is a registred Trade Mark of VDA, Verband der Deutschen Automobilindustrie e.V.

shipment

  • 1 filler unit, including container connection
  • 1 tank filling socket for MB vehicles
  • 1 plastic container, capacity 10 litres (for emergency use, empty)
  • 1 transparent filler hose, length 1.60 m
  • 1 transp. venting hose, length 2.00 m

Filler unit to fill SCR systems (with gas-displacement techniques)

  

ABE 03_LR (061201_5)

Filler unit, to be used, especially to fill SCR systems with AdBlue®* operation additive, incl. 10 l canister.

  • Filling with gas-displacement techniques
  • for mobile use (independent of electrical power supply and compressed air) 
  • geschlossenes System verhindert Überfüllung
  • keine Geruchsbelästigung des Anwenders
  • keine Möglichkeit des Verspritzens/Verschüttens
  • preisgünstiger Einstieg in die Wartung von SCR-Systemen

shipment

  • 1 filler unit, including container connection
  • 1 plastic container, capacity 10 litres (for emergency use, empty)
  • 1 transparent filler hose, length 1.60 m
  • 1 transp. venting hose, length 2.00 m

Inflating hose for 10 l container

  

ABE 04_LR (061208_1)

To fill SCR systems with AdBlue®* operating additive. To be used as adapter between container and tank. For transferring the fluid from the container into the tank. Eliminates the possibility of contaminating the environment with AdBlue®* operating additive.

Vacuum box for evacuation of the SCR tank

  

VB 01.1_AB (100801_5)

The VB 01.1_AB vacuum box is suitable to extract AdBlue®* operating additive out of the SCR tank. The unit can be used mobile and stationary. It has a capacity of 11 l.

For a detailed description, see section ´Brake systems´.

Applications:

  • before replacing damaged components, e.g. the SCR pump
  • to change the AdBlue® operating additive

*AdBlue® is a registred Trade Mark of VDA, Verband der Deutschen Automobilindustrie e.V. 

shipment

  • 1 vacuum box with venturi nozzle
  • 1 transparent suction hose with connections, length 2.50 m (8.3 ft)
  • supplied in a carton pack

Rugged suction pump, with stainless-steel housing, 12 V/DC

  

EAP 10_12 (061301_1)

Rugged suction pump, 12 V/DC, with stainless-steel housing. Designed especially for use with operating materials in SCR systems (urea-water solution). Design with ON/OFF switch and priming protection.
Power supply with either plug for cigarette lighter or battery terminals (motor vehicle)

  • feed rate 10 ltr./min.
  • sturdy stainless-steel housing
  • self-priming
  • easy to use
  • quiet operation

Caution: Cannot be used for gasoline and highly flammable media!

shipment

  • EAP 10_12 suction pump
  • 1 suction hose, length 1.00 m (3.3 ft)
  • 1 outlet hose, length 2.00 m (6.6 ft)
  • 1 power supply cable with plug and battery clamps, length 3.00 m (10 ft.)

Rugged suction pump, with stainless-steel housing, 24 V/DC

  

EAP 10_24 (061302_1)

Rugged suction pump, 24 V/DC, with stainless-steel housing. Designed especially for use with operating materials in SCR systems (urea-water solution). Design with ON/OFF switch and priming protection. Power supply with either plug for cigarette lighter or battery terminals (motor vehicle)

  • feed rate 10 ltr./min.
  • sturdy stainless-steel housing
  • self-priming
  • easy to use
  • quiet operation

Caution: Cannot be used for gasoline and highly flammable media!

shipment

  • EAP 10_24 suction pump
  • 1 suction hose, length 1.00 m (3.3 ft)
  • 1 outlet hose, length 2.00 m (6.6 ft)
  • 1 power supply cable with plug and battery clamps, length 3.00 m (10 ft.)
  • delivery in solid plastic case

Universal adapter for emptying an SCR tank or adjusting the filling level

  

VBA 04 (100814_1)

Universal adapter, suitable to empty any SCR tank with a narrow cross-section or to adjust the level in the SCR tank. The adapter can only be used in conjunction with the vacuum box VB 01_AB. Accessory to the vacuum box VB 01_AB.

AdBlue® (operating additive) resistant version, with hose 2.5 m.

SCR-adapter, refuel connector, intermediate piece

  

ET 888 (111863_1)

Accessory for ABE 03_LR, ABE 03_LR, ABE 02_MB, AEKP 06

Connector for ABE 03_LR, if opening is in fuel tank neck. Intermediate piece.

In case that the filling opening is located in the fuel tank neck, remove the 2 hoses of the ABE 03_LR from the tank side adapter and connect them with the ET 888.

Device to measure the operating pressure and tightness of SCR-systems

  

FP 07_AB (041228_1)

Device to measure the operating pressure and tightness of SCR-systems.
With push-in fitting for the connection to SCR-system.

  • measuring range -1...+9 bar
  • compound gauge DS 63 mm (2 1/2")

Device to measure the operating pressure and tightness of SCR-systems, with digital gauge

  

FPD 07_AB (041228_3)

Device to measure the operating pressure and tightness of SCR-systems. With digital gauge for higher measurement accuracy and easier read out.

With push-in fitting for the connection to SCR-system.

  • measuring range -1...+16 bar
  • digital gauge with rubber protective cap

Mini test bench for SCR injectors

  

MP_SCR 01 (041253_1)

To test SCR metering valves (passenger cars). With this set-up the following tests can be run:

  • single shot test
  • inspection, if all injection drillings are open
  • “10 minute test“: injection volume within 10 minutes under a fixed program

1 CREIS 01_SCR electronic injection controller, 12 V/DC
2 CREL 01_SCR electronic power section
3 FP 07_AB pressure tester
4 reservoir 1 L (water or urea-water resolution) incl. pressure regulator
5 SCR-metering valve (test specimen) NOT included
6 measuring beaker

To operate the mini test bench, a 12 V/DC battery is required, as well as compressed air. All components are fitted on an urea-resistant panel.