Engine pressure-loss tester in metal housing for petrol and Diesel engines permitting the pinpointing of pressure loss in cylinders.Supplied with additional control knob to increase air admission pressure, facilitating the audible locating of possible leakage point. Before the test is carried out, the engine is adjusted by workshop pressure to a permissible pressure loss (approx. 23 %). If the test instrument needle falls beyond 23%, the pressure loss is unacceptable.
Possible areas of leakage:
|
Engine pressure-loss tester with connection to workshop pressure. Indicates the cylinders’ pression-loss in percent. Precision gauge DS 80 mm (3 1/4") with green area (tolerated compression-loss); robust protective rubber cap. |
Engine pressure-loss tester with connection to workshop pressure. Delivery unit additional with upper dead point tester OT 04.
The included adapters can be used in combination with Leakage tester DRV.. and Upper dead point gauge OT 04.
Engine pressure-loss tester with connection to workshop pressure. Indicates the cylinders’ pressure-loss in percent. Precision gauge DS 80 mm (3 1/4") with green area (tolerated compression-loss); robust protective rubber cap.
Engine pressure loss tester, specification as DRV 05. Test hose 1,00 m long (3 ft), connectable adapter ZKS 01.1 spark plug thread M 14x1.25 and M 18x1.5, additional 2 adapters, see delivery unit.
Engine pressure-loss tester, specification as DRV 05, but with additional gauge for the inlet pressure. Test hose 1 m long (3 ft), connectable adapter ZKS 01.1 spark plug thread M 14x1.25 and M 18x1.5.
Other Adapters can be supplied with different lengths, including versions with clamps for use on commercial vehicles (on request).
Engine pressure-loss tester for petrol engines.
1 pressure-loss tester DRV 05
3 Adapters / petrol engines KPA 08, 09, 10 (flexible)
Engine pressure-loss tester for petrol and diesel engines with connection to workshop pressure. Indicates the cylinders’ pression-loss in percent. Precision gauge, digital DS 80 mm (3 1/4“) with robust protective rubber cap.
1 engine pressure-loss tester DRVD 05
delivered in paper box
Engine pressure-loss tester in metal housing for petrol and diesel engines permitting the pinpointing of pressure loss in cylinders. Supplied with additional control knob to increase air admission pressure, facilitating the audible locating of possible leakage point. Before the test is carried out, the engine is adjusted by workshop pressure to a permissible pressure loss (approx. 23 %).
1 engine pressure-loss tester DRVD 02
1 standard test hose, 1.00 m long (3 ft), with quick coupling
1 connectable adapter ZKS 01.1, with spark plug thread M 14x1.25 and M 18x1.5
delivered in paper box
Upper dead point gauge. To achieve the optimum adjustment
of ignition timing, the cylinder´s dead center has to be found. This is particularly difficult, if ignition timing marks are indistinct. By means of a ball in an acrylic glass-pipe with scale, the upper dead center can be found easily. The OT 04 can be used with the same adapters as for the Cylinder leakage testers DRV 05 or DRV 06.