lt en ru
Autotestas header

System-pressure tester for mechanical and electronic fuel injection systems

  

LR 180/2, LR 180/2_21 (041605, 041622_1)

High quality for professional use. System-pressure tester for mechanical and electronic fuel injection systems. The tester can be used for the following systems:

  • K-Jetronic, KE-Jetronic, L/LH-Jetronic, Motronic, MPI, HMPI, EFI, DIGIFANT, Mono-Jetronic, Opel-Multec, Weber CFI
  • measuring range 0...10 bar / 0...140 psi, graduation 0.1 bar

An adjustable three-way valve located between the warm-up regulator and fuel distributor permits the system pressure and control pressure to be tested, and the fuel injection system to be checked for leakages.
High quality gauge with robust protective rubber cap and hook, DS 100 mm (4"). With 12 adapters for the connection with European and Asian vehicles.
Available with an ISO certificate of calibration (at extra charge).

shipment

LR 180/2:

  • 1 pressure gauge
  • 1 three-way valve, connectable
  • 3 hoses each end with quick coupling, each 0.25 m long
  • 12 adapters DPAK 3, 4, 5, 6, 7, 8, 9, 11, 12, 13, 14, 21
  • supplied in solid plastic case

LR 180/2_21:

  • same as LR 180/2 additional 9 adapters DPAK 1, 2, 22, 26, 28, 29, 30, 31, 32

System pressure tester for mechanical and electronic fuel injection systems

  

LR 180/4 (041615)

System pressure tester for mechanical and electronic fuel injection systems. Extended version of LR 180/2 with 30 adapters. Thanks to this wide range of adapters, use is assured with almost all makes of car. The supplied unit contains 1 drain valve for the discharge of residual fuel. Available with an ISO certificate of calibration (at extra charge).

shipment

  • 1 pressure gauge
  • 1 three-way valve, connectable
  • 3 hoses each end with quick coupling, each 0.25 m long
  • 30 adapters DPAK 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 13, 14, 19, 21, 22, 24, 26, 27, 28, 29, 30, 31, 32, 34, 35, 36, 37, 38, 39
  • 1 extensions hose 1.00 m long (3 ft)
  • 1 drain valve
  • supplied in solid plastic case

accessories kit

  • ET 366 ( 121382) extension hose, length 3.00 m (9.8 ft), fuel resistant, with quick coupling on both sides. Used to check fuel pressure while driving.

spare part

  • ET 104 (120508) gauge DS 100 mm with protective rubber cap and hook
  • ET 136 (120590) three-way valve (connectable)
  • ET 143 (120520) hose each end with coupling 0.25 m (9.8 in)
  • ET 280 (121176) extension hose 1.00 m (3.3 ft)
  • ET 719 (111765) extension hose 20 cm (7.9 in) with coupling and nipple DN 5
  • AVE 02_LR (040780_1) drain valve for LR 180/4

System pressure tester for mechanical and electronic fuel injection systems

  

LR 180/2_Honda (041619)

System pressure tester for mechanical and electronic fuel injection systems.

  • version in accordance with HONDA requirements

shipment

  • 1 gauge DS 100, range 0...10 bar / 0...140 psi, with protective
  • rubber cap and hook
  • 1 three-way valve (connectable)
  • 3 hoses, each end with quick coupling 0.25 m (9.8 in.)
  • 3 adapters DPAK 52, 53, 61 (with push in fitting)
  • 1 adapter ANK 47 (with thread)
  • 1 drain valve AVE 01 with hose
  • supplied in solid plastic case

Extension hose

  

ET 366, accessories (121382)

Accessory for fuel system pressure testers LR 180.

Extension hose, length 3.00 m (9.8 ft.)

  • fuel resistant
  • with quick coupling on both sides

Used to check fuel pressure while driving.